Rocom Doortello Business FW T2.05W2.04 Uživatelská příručka stáhnout pdf (Strana 20)

User guideDoortello BusinessIssue 1.02

Page 20

The dial pad can be use to dial telephone numbers and/or speed dial codes. This

function is free programmable (read also Chime buttons and functional keys

programmation). If needed you can use also both functions programming the

functional buttons on the dial pad or chime button modules. If you select the speed

dial function you can enter a two digits long code on the dial pad. This code will

then dial a up to 16 digits long stored telephone number on the telephone line.

The speed dial codes can be 00 tp 99, this means that you have up to 100 speed dial

locations available.

As digits inside a telephone number you can use all numbers from 1 to 0, as well

the special codes * , # and the functions „flash“ and pause. From factory no

numbers are programmed in the speed dial locations.

To program the speed dial numbers follow this procedure:

OK tone {telephone number} {speed dial code} OK tone

As digit for the telephone number (max 16 digit for each telephone number) the

following values can be entered:

Digits: , , , , , , , , , ;

Special dial functions: , will dial the code (is considered as 1

digit);

, will dial the code (is considered as 1

digit);

, will make a dial pause of 2 seconds (default

value) duration (is considered as 1 digit);

, will send a „Flash“ (short line interruption,

„Recall“ button) of 80 ms (default value)

duration (is considered as 1 digit);

Codes: from to

Example:

n The speed dial code 65 must dial the telephone number 66000.

As your PBX

does not have an automatic trunk selection feature activated you must dial a 0 to

size the trunk. To ensure the correct dial after the trunk sizing a pause has to be

inserted. Programmation:

Speed dial numbers

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Žádné komentáře

Rocom Doortello Business FW T2.05W2.04 Uživatelská příručka Strana 20